Fujian CIQ Information
Enterprise Edition · electromechanical appliances monograph
(Article 3, Section 51 total)
Fujian Inspection and Quarantine Bureau, Fuqing Inspection and Quarantine series Two OO nine February 15
★ ★ period REVIEW
The
main issue to compile the European Union, the United States informed
the recent cases of Chinese machinery and electronic products,
introduces the United States will increase daily energy efficiency
standards, the US Consumer Product Pseudoelastic lead content limits for
implementation of the new IEC standards promulgated directory and Fujian CIQ helping enterprise development situation for the industry reference.
★ ★ guard service
Long work Casting projects total $ 8.57 million imported equipment
Fujian Inspection and Quarantine since September 2008 issued "on the support of eight measures Lonking Casting Project" since the release of the project a total of 11 batches of test, the value of $ 8.57 million imported equipment, for enterprises to save travel costs and container trailers occupancy costs nearly 80,000 yuan, while saving a lot of operating hours, to ensure that the project hydraulic line during "11.18 Longyan Investment and Trade Fair" scheduled production. (Longyan bureau)
Inspection and Quarantine Bureau, Fuzhou, after a lapse of two and a half to restore the inspection of imported scrap steel
Recently, located at the mouth of the Minjiang River in Changle City, Fujian Xin Tong pier first import a batch of 3300 tons, the value of $ 643,500 of scrap steel. This is the first time in Fuzhou Inspection and Quarantine inspection of imported scrap steel since the second half of 2006.
Fuzhou Inspection and Quarantine Bureau to take three measures to ensure the smooth operations: First, early intervention, to inform the consignee relevant laws and regulations on the import of scrap steel; the second is the first time to draw up plans, consult experts, visited enterprises, survey the scene, familiar procedures and documents related to the development of the survey program; three is to hold a special meeting on the work of the division, the designated person responsible, put contingency plans to ensure the successful completion of the work. (Fuzhou Office)
Fuzhou Inspection and Quarantine Bureau to take three measures to ensure the smooth operations: First, early intervention, to inform the consignee relevant laws and regulations on the import of scrap steel; the second is the first time to draw up plans, consult experts, visited enterprises, survey the scene, familiar procedures and documents related to the development of the survey program; three is to hold a special meeting on the work of the division, the designated person responsible, put contingency plans to ensure the successful completion of the work. (Fuzhou Office)
Standard dynamic ★ ★
IEC Standard Catalog 2009 issued in late January
No.
|
Standard code
|
Published
|
Chinese Name
|
1
|
ISO / IEC 14165-116-am1
|
22/1/2009
|
Amendment 1 IT --- --- --- 116 Fibre Channel components: 10-bit Fibre Channel (10GFC)
|
2
|
ISO / IEC 14165-521
|
22-Jan-09
|
IT --- --- 521 Fibre Channel components: Fiber Application Interface Standard (FAIS)
|
3
|
ISO / IEC 14496-9
|
20-Jan-09
|
IT --- --- visual object coding Part 9: Reference hardware description
|
4
|
ISO / IEC 14762
|
28-Jan-09
|
IT --- home and building electronic systems functional safety requirements (HBES)
|
5
|
IEC 60115-8
|
26-Jan-09
|
Electronic equipment --- Part 8 Fixed Resistors: Sectional specification --- surface mounting resistors
|
6
|
IEC 60205
|
26/1/2009
|
Calculation of magnetic piece parts of the effective parameters
|
7
|
IEC 60205-am1
|
28/1/2009
|
Amendment 1 --- magnetic piece parts valid parameter calculation
|
8
|
IEC 60317-16-am2
|
26/1/2009
|
Amendment 2 windings special type specification --- --- Part 16: coated polyester rectangular copper wire, 155
|
9
|
IEC 60335-2-31
|
28/1/2009
|
Household and similar electrical appliances --- --- Safety - Part 2-31: cooking hoods kitchen hoods and other specialized requirements
|
10
|
IEC 60335-2-96
|
28/1/2009
|
Household and similar electrical appliances --- --- Safety - Part 2-96: Indoor heated Particular requirements for flexible sheet heating elements
|
11
|
IEC 60335-2-97
|
28/1/2009
|
Household and similar electrical appliances --- --- Safety - Part 2-97: Rotary shutters, awnings, and similar equipment darkroom Particular requirements for drives
|
12
|
28/1/2009
|
Household and similar electrical appliances --- --- Safety - Part 2-102: There are gas, oil and solid fuel burning devices require special electrical connections
| |
13
|
IEC / TRF 6 0335-2-23
|
30/1/2009
|
This Test Report Form applies to IEC 60335 2 23: 2003 (5 edition) (including Corrigendum 1: 2004 + Corrigendum 2: 2008) + A1: 2008, and IEC 60335 1: 2001 (4. Edition) (includes errata 1: 2002) + A1: 2004 (including Corrigendum 1: 2005) + A2: 2006 (including Errata: 2006) together with
|
14
|
IEC / TRF 60335-2-39
|
30/1/2009
|
The test report format suitable for IEC 60335 2-39: 2002 (5 edition) + A1: 2004 and IEC 60335 1: 2001 (4 edition) (includes errata 1: 2002) + A1: 04 + A2: 06 (including errata Table 1: 2006)
|
15
|
IEC / TRF 6 0335-2-15
|
30/1/2009
|
The test report format suitable for IEC 6 0335-2-15 : 2002 (5th edition) + A1: 2005 + A2: 2008 and IEC 60335-1: 2001 (4 edition) (includes errata 1: 2002) + A1: 2004 + A2: 2006 (including Corrigendum 1: 2006)
|
16
|
IEC 60601-1 Corr.I2
|
28/1/2009
|
Interpretation 2 --- --- Medical electrical equipment - Part 1: Basic safety and essential performance requirements for total
|
17
|
IEC 6 0669-2-1
|
28/1/2009
|
Household and similar fixed electrical installations switches --- Part 2-1: Particular requirements for electronic switches ---
|
18
|
IEC 6 0794-3-10
|
26/1/2009
|
Optical fiber cables --- Part 3-10: Outdoor cables --- ducted directly buried and lashed aerial fiber optic communication cable series specification
|
19
|
IEC 60851-3
|
28/1/2009
|
Windings --- --- Test methods - Part 3: Mechanical properties
|
20
|
IEC 60947-2-am1
|
26/1/2009
|
Amendment 1 low pressure switch and controller --- --- Part 2: Circuit breaker switch
|
Twenty one
|
IEC 6 1000-4-17
|
28/1/2009
|
Electromagnetic compatibility (EMC) --- Part 4-17: Testing and measurement techniques --- dc input power port anti-surge test and measurement
|
Twenty two
|
IEC 61058-1 Corr.1
|
28/1/2009
|
Amendment 1 --- --- electrical switches - Part 1: General requirements
|
Twenty three
|
IEC 6 1196-6-1
|
22/1/2009
|
Coaxial communication cables --- Part 6-1: CATV drop cables - Blank detail specification
|
Twenty four
|
CISPR 14-1 Corr.1
|
28/1/2009
|
Amendment 1 --- --- EMC household appliances, electric tools and similar apparatus --- Part 1: Radiation
|
25
|
IEC 6 1300-3-7
|
26/1/2009
|
Optical fiber links and passive components --- --- Basic test and measurement procedures - Part 3-7: Checking and measuring the impact --- wavelength attenuation and return loss of single-mode component
|
26
|
IEC 61300-3-43
|
22/1/2009
|
Optical fiber connectors and passive components - Basic test and measurement procedures --- --- Section 3-43: Examinations and measurements --- transfer function measurement mode fiber source
|
27
|
IEC 61314-1
|
28/1/2009
|
Optical fiber connectors and passive optical output element --- --- Part 1: Generic specification
|
28
|
IEC 6 1347-2-10
|
28/1/2009
|
Lighting controller --- Part 2-10: cold start tubular discharge lamps (neon lights) and high frequency operation of electrical converter converter specifically requested
|
29
|
IEC 61439-1
|
22/1/2009
|
Low-voltage switchgear and control assemblies --- Part 1: General Rules
|
30
|
IEC 61439-2
|
22/1/2009
|
Low-voltage switchgear and control assemblies --- Part 2: Power switch and controller components
|
31
|
IEC 61534-22
|
22/1/2009
|
Power leakage System --- Part 22: Ground or underground equipment for power tracking system specifically requested
|
32
|
IEC 61676
|
26/1/2009
|
Medical electrical equipment --- diagnostic radiology X-ray tube voltage into the body of a non-dosimetry measurement equipment
|
33
|
IEC 61753-085-2
|
26/1/2009
|
Optical fiber links and passive components performance standard --- Section 085-2 Part: Class C No singlemode connector has tapped a controlled environment CWDM devices ---
|
34
|
IEC 61914
|
28/1/2009
|
Electrical installation with cable clamp
|
35
|
IEC 62007-2
|
26/1/2009
|
Semiconductor optoelectronic devices for fiber optic system applications --- Part 2: Methods of measurement
|
36
|
IEC 62080
|
28/1/2009
|
Household and similar purposes audio signal display
|
37
|
IEC 6 2137-1-4
|
26/1/2009
|
Surface mount solder surface mount technology --- the environment and resistance to environmental testing --- Part 1-4: repeated bending test
|
38
|
IEC / TRF 62233
|
30/1/2009
|
The test report format suitable for IEC 62233: 2005, First Edition
|
39
|
IEC 62271-110
|
26/1/2009
|
High voltage switches and controllers --- Part 110: Inductive load switching
|
40
|
IEC 62271-SER
|
26/1/2009
|
High voltage switches and controls all parts ---
|
41
|
CISPR 25 Corr.1
|
22/1/2009
|
Corrigendum 1 --- transport vehicles, vessels and internal combustion engines of radio disturbance characteristics --- --- receiver on the travel range of protective measures and methods
|
42
|
IEC 62296
|
22/1/2009
|
IEC60601-1 safety considerations not mentioned in the second edition of the new requirements and recommendations [
|
43
|
IEC / PAS 62591
|
22/1/2009
|
Industrial communication networks - Fieldbus specifications --- --- wireless communication network and communication profile
|
44
|
IEC / PAS 62596
|
22/1/2009
|
Electromechanical products --- --- restricted substances measured sampling procedure --- Guidelines
|
Forty five
|
IEC 80601-2-30
|
28/1/2009
|
--- Medical electrical equipment - Part 2-30: automated non-invasive blood pressure monitor body of basic safety and essential performance requirements
|
(From China Electronics Standardization Institute website) (Fuqing Bureau)
★ ★ foreign communications
EU non-food commodities Rapid Alert System (RAPEX) and
The US Consumer Product Safety Commission (CPSC) to communicate information
Non-EU
Rapid Alert System for food commodities and the US Consumer Product
Safety Commission recently informed Chinese electromechanical product
names and informed reasons are summarized as follows:
1, Hungary informed China YUQIANG brand solar rechargeable flashlight, model YQ-389. Flashlight casing is white plastic texture, lamp uses six LED bulbs, covered with clear plastic. The product is installed in the built-in battery that can be recharged using the power cord specifications for 300V PVC insulated wire, plug specifications 6A / 250V. No labels on the packaging Hungarian nor the CE mark, the size is 15.2 x 5.7 x 3cm . Informed of the reasons for the flashlight does not comply with the EU Low Voltage Directive and the European standard EN60598, it is in danger of electric shock. Size
and distance plugs undesirable; inappropriate size of the power cord;
bulbs installed insulation means unreasonable; flashlight did not pass
the electric strength test.
2, Hungary informed China PHH SZCZEPAN lamp brand, model A101541-B / 9 and A101544-B / 9, barcode 5907768176921 and 5907768176938. Informed of the reasons for the lamp does not comply with the Low Voltage Directive and the European standard EN60598, it is in danger of electric shock. Metal pipe after the sharp edge of the wire, and lamp holder and wires can not prevent rotation.
3, Hungary informed China HUASHENG brand headlights, model 0804. The headlights use a seven white LED bulbs, and is equipped with a charging adapter. Choking
for the headlights do not comply with the Low Voltage Directive and the
relevant standards, it is in danger of electric shock. Size of the plug does not comply, when access to power, the human body can come into contact with live pins.
4, Spain informed China LEIVA electric iron brand, model SDA-40, barcode 8431487118711. Blister packaging for the boxes, marked above by CE certification, the power is 40W. Choking for electric iron does not comply with the EU Low Voltage Directive and the European standard EN60335, the temperature in the use of insulated electric iron handle than the standard requirements, there is a risk of burns people. Was measured, the temperature of which the handle is 60.5 ℃ ± 3.2 ℃ , While the standard limit for 50 ℃ .
5,
the United States informed China halogen clamp lamp, informed the
reason for the UV lamp glass may break, causing leakage halogen bulb
inside, causing a risk of fire and burns.
6,
the United States informed China of double stove portable gas stove,
notification of the reason is an unstable gas supply will cause a sudden
increase of the flame, while the rain will remain in the gas furnace,
causing flames. These circumstances give consumers dangerous burns.
7,
the United States informed China produced electronic alarm clock,
because the ground fault notification electronic alarm clock, causing a
shock hazard to consumers. (Quoted EU, the US official website) (Fuqing Bureau)
Nightlight exports to be concerned about Europe, "safety requirements"
Recently,
a lamp factory in Zhejiang Yuyao exports to Slovakia night light
because they do not meet the "power socket fixed Nightlight safety
requirements," the national standard in the country's latest release, is
to prohibit the sale, and was asked to recall products already sold.
April 1, 2006 The EU issued a EN6 0598-2-12 : 2006 standards,
the Nightlight provision from ordinary fixed lighting out, set up a
separate special standards, and called on Member States to gradually
transformed into national standards, April 1, 2009 , Is the deadline for conversion. Compared
with the old standard, the new standard in the use of special screws
shade, shade in the hot test, stress test and after aspects drop test
should be intact, shape and decoration should not be treated as
children's toys and other requirements increase. Because
of the different EU countries transformed time, to enable the national
standard time there has, and now there are a lot of countries have
completed the conversion, so that, according to the old standard
production night light, the risk of failure in the European Union have
been sentenced to sell high.
To
this end, inspection and quarantine departments to remind producers:
First, we must focus on standards of the importing country promptly,
especially changes in the standard; the second is the standard changes
caused by changes in product mix requirements, the need to modify the
design or scrap the old product of the action to be rapid, timely
response in advance; Third Nightlight export enterprises should take
immediate action to halt exports to the EU the old section of the
product, do not feel lucky to go to the "red card", so as not to lose the greater cause to prohibit the sale or return and other major losses. For
older products, to early change unarmed removable shade, shade with
animals or fairy graphics, structure, good momentum for the early
resumption of exports of the EU, in order to comply with the new
standard of excellent quality, win the market, to achieve greater
development. (From China Trade Remedy Information Network) (Fuqing Bureau)
★ ★ technical barriers
The United States will increase daily energy efficiency standards
US President Barack Obama February 5 Issued
instructions to the government for lighting, everyday appliances like
microwaves develop higher energy efficiency standards. Obama's
day in the United States Department of Energy, said he had signed a
presidential memorandum asking the Department of Energy to improve
energy efficiency standards for household appliances. This measure will save the consumer spending to stimulate technological innovation, and save a lot of energy. It
is reported that the first batch of energy efficiency standards will be
issued before August this year for dishwashers, lamps, combination
ovens, microwave ovens, air-conditioning equipment, skillet and beverage
machines and other appliances nine categories. (Excerpt from China Quality News Network) (Fuqing Bureau)
South Korea will revise construction machinery safety standards
January 22, 2009 South Korea Land and Maritime Affairs (MLTM) published "The Korean construction machinery safety standards," the draft regulations announced. Korean construction machinery safety standards (KCMSS) will make the following amendments:
1. South Korean construction machinery safety standards and International Organization for Standardization (ISO) standards will apply to construction machinery. (Article 5, paragraph 1);
2. For (fork) lift truck, will allow it to grab the forward angle below 6 degrees backward angle grab below 12 degrees. (Article 20, paragraph 3);
3. In the electronic crane with an alarm device can not install load indicator. (Article 40, paragraph 3);
4. In
the case of tower cranes installed in the control room monitor load and
display the distance, you can not install the load and distance display
panels. (Article 124, paragraph 2);
5. For the construction machinery with internal or external power supply will be the introduction of a requirement. (Article 129-2 to 129-8 strip bar);
6. In the case of dump trucks will allow the use of asphalt folding rear reflector plate. (Section 136)
7. In
order to increase the brightness, should be installed after the
reflector or reflector plate, rear reflector sheet, down lights,
flashing warning lights, and other lights. (Article 155 to Article 161-8);
8. "Noise and Vibration Act" would apply to noise. (Section 167) (excerpt from Jiangsu WTO / TBT Information Service) (Fuqing Bureau)
The US Consumer Product Pseudoelastic lead content limits for implementation
Consumer Product Safety Commission recently presented four motions for 12 years or less new lead content limits for children's products provide some flexibility. According to "Consumer Product Safety Improvement Act", originally scheduled for six hundred millionths (600ppm) of lead content limit is scheduled to February 10 Take
effect after that date or applicable to sales of all related products,
including inventory; prohibition against certain types contain
phthalates will also be implemented on the same day. For three hundred millionths of children's products (300ppm) lead content limit is expected to be August 14 Force, and in 2011 tightened to one hundred millionths (100ppm), unless the Consumer Product Safety Commission ruled that the criteria for a product or a product category is not feasible.
The four parts
of the motion involves a number of lead-free materials exemption, the
exemption of the reach of children's products in parts, the Consumer
Product Safety Commission to determine the lead content limit made or
given, as well as a number of exemptions limit the lead content of
electronic devices project. Insiders may February 17 Prior to advise on the relevant legislation. (Excerpt from Jiangsu WTO / TBT Information Service) (Fuqing Bureau)
★ News ★
Chongqing and other household appliances will be transferred Midwest
At
present, "Light draft three-year revitalization plan" has been
submitted to the Ministry of Industry and Information Technology, in
conjunction with the consideration by the National Development and
Reform Commission after the State Department turned over, expected to be
introduced in two sessions before and after March 2009.
According
to the National Bureau of Statistics caliber current, light industry is
divided into 19 categories 137 subcategories, including agro-food
processing, food and beverage manufacturing, furniture, paper,
stationery and sporting goods, cosmetics, plastics, glass, ceramics,
metalwork , household appliances and lighting, clocks, glasses,
architectural decoration industry. It
is understood that light industry revitalization plan will focus on
food, household appliances, paper, plastic, leather, cosmetics, medical
equipment. Home
appliance industry, for example, will strive to achieve refrigerators,
air conditioners, washing machines and other key product development,
manufacturing, distribution by the Pearl River Delta, Yangtze River
Delta and the Bohai Sea and other areas, to Anhui, Chongqing, Sichuan,
Hubei, Jiangxi and other Midwest regional metastasis. (From China Industry Research Network) (Fuqing Bureau)
MIIT brewing restore acid battery industry export tax rebate
Affected by the financial crisis, the second half of 2008
plunged the domestic raw material markets, international buyers
withdrawals, breach of contract, destroyed a single constant, lead-acid
battery industry to bring a heavy blow. Because
lead-acid battery is labor intensive, large number of enterprises cut,
cut unemployment and resulting in massive business. The industry average of 40% to 50% of the job cuts are expected to reach 20 million people in total. This situation continues, China's lead-acid battery exports will collapse situation. Recently,
the Ministry of Energy and Resources Utilization Division held a
lead-acid battery industry development forum, analysis and policy
bottlenecks in the current outstanding problems facing the industry,
lead-acid battery industry research countermeasures to deal with the
crisis.
To
promote the development of the industry, participants made
suggestions: First, lead-acid batteries for processing trade export
tax rebate raised to 15%; VRLA batteries raised to 13% export tax rebate; ordinary lead-acid batteries raised to 9% export tax rebate. Second, the withdrawal of the lead-acid battery industry, "two high" restrictive industry, in terms of business expansion by giving some financial support. Third,
the VRLA batteries, high-tech wind power lead-acid batteries, gel
lead-acid batteries and other, non-polluting products included in the
national policy support products. It
is reported that the above recommendations have been initially
recognized MIIT Energy and Resources Utilization Division, recovery of
the industry to support the export tax rebate policy are in the
pipeline. (Excerpt from Shanghai Securities News) (Fuqing Bureau)
The main market in the field of diesel engines for commercial vehicles
According to the latest statistics showed that, by fuel type, year 2008, diesel engine production and sales were completed 2,333,600 units and 2,397,000 units, an increase of -0.07% and 3.30% respectively. From the statistical units in kilowatts see production growth rate, an increase of 2.10%, higher than the production capacity of the statistical unit growth rate 2.17 percentage points. This heavy-duty commercial vehicles with the overall annual production capacity of diesel vehicles up to 11.81% and
the growth rate of China's heavy truck, Dongfeng Motor, FAW Group,
Shaanxi Automobile Group, Foton and Baotou Bei Ben Heavy diesel
vehicles, several companies have made no vulgar achievements are
inseparable. (From China Industry News) (Fuqing Bureau)
Send: Fujian CIQ area and export enterprises
Council: Bureau, the branches, the provincial bureau of business management at the Technical Center, the Association
Note: Articles can log in "import and export enterprises in Fujian Inspection and Quarantine Information Service System" Query (URL: http://www.efjciq.cn/jyjyweb/index.jsp)
No comments:
Post a Comment